ZDS-MR5019
ZDS-MR5019 Multi-Purpose Repair Compound
ZDS-MR5019 repairs and rebuilds damaged industrial components and pipelines. Its multi-substrate compatibility supports prepared metal, ceramic, glass-lined, glass and stone surfaces.
Product overview
Multi-Substrate Repair Compound
ZDS-MR5019 is a repair and rebuilding compound for damaged metal components, industrial pipelines, ceramic and glass-lined equipment, and glass or stone components. It is used to restore the shape of a prepared repair area during planned field work.
Its multi-substrate compatibility helps support repairs across different industrial materials, while adhesion to prepared surfaces helps the compound stay attached to the repair area. The actual damage, finished shape and access around the component are important when deciding whether it fits the job.
Key material properties
- Substrate compatibility: Match the actual contact material to the intended application.
- Adhesion to prepared surfaces: Surface condition and preparation are important to the bond.
- Field application: Suitable for consideration in a planned on-site repair.
Evaluate the material
ZDS-MR5019 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-MR5019 |
| Product series | ZDS-MetalRebuild |
| Product family | Metal rebuilding & cold repair |
| Substrates and equipment | Ceramic and glass-lined equipment, glass and stone components, industrial pipelines, metal components |
| Form and color | Adhesive; Typical: Grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h at 25°C |
| Service temperature | Typical: -40°C to +120°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 1-5 mm |
Questions about your operating conditions?
Repair and Rebuilding Uses
Rebuild damaged industrial components
Use ZDS-MR5019 to repair and rebuild damaged metal components and industrial pipelines. Its adhesion to prepared industrial surfaces supports planned field repair work where the repair area can be reached and shaped.
Match the compound to the repair area
The compound is also suited to ceramic, glass-lined, glass and stone components. Check the repair dimensions and available access first so the material can be placed across the area and formed to the required shape.
Prepare the work surface
Prepare the repair area using the product-specific preparation instructions.
- Inspect the damaged area and the surrounding component for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the repair area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Place and shape the repair material according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h at 25°C. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: Typical: -40°C to +120°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 1-5 mm. Use the stated thickness type and range when planning the work.