ZDS-RE3012
ZDS-RE3012 3-Minute Rapid Rubber Repair Compound
ZDS-RE3012 repairs and rebuilds conveyor belts and protective linings. Its rapid-cure elastomeric form supports flexible bonding and sealing.
Product overview
Rapid rubber repair compound
ZDS-RE3012 is a cold-applied adhesive for repairing and rebuilding conveyor belts and protective linings. It forms an elastomeric repair that supports flexible bonding and sealing on these components.
Its rapid cure helps reduce the time equipment remains unavailable for repair. The flexible material is most relevant when the repaired area must accommodate movement, so component condition and operating movement are important selection factors.
Key material properties
- Rapid cure: Use the product cure schedule to plan the work and equipment downtime.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3012 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3012 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Conveyor belts, protective linings |
| Form and color | Adhesive; Typical: Black |
| Working time at 25°C | Typical: 5-15 min |
| Initial cure at 25°C | Typical: 15-30 min |
| Full cure / cure conditions | 3 h |
| Service temperature | -40 to 85°C |
| Shear strength | 10 MPa |
| Hardness | Shore D 65 |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 2-10 mm |
Questions about your operating conditions?
Repair and rebuilding applications
Conveyor belt repair
ZDS-RE3012 repairs and rebuilds damaged areas on conveyor belts. Its rapid cure can help organize repair work around equipment downtime, while its elastomeric form suits flexible belt components.
Protective lining repair
Use ZDS-RE3012 for repair work on protective linings where the component can move during service. Check the damage, surface condition and expected movement when deciding whether its flexible bonding and sealing properties fit the job.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 5-15 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 3 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -40 to 85°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 2-10 mm. Use the stated thickness type and range when planning the work.