ZDS-RE3008
ZDS-RE3008 Mining Conveyor Belt Repair Adhesive
ZDS-RE3008 repairs and rebuilds conveyor belts and protective linings. Its ready-to-use elastomeric form supports flexible bonding and sealing.
Product overview
Mining Conveyor Belt Repair Adhesive
ZDS-RE3008 repairs and rebuilds conveyor belts and protective linings. It is a cold-applied elastomeric adhesive for flexible bonding and sealing tasks.
The single-component, ready-to-use form supports practical repair work without a separate mixing step. Its flexible behavior matters where the repaired area moves with the component.
Key material properties
- Single-component form: No separate component-mixing step is needed.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3008 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3008 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Conveyor belts, protective linings |
| Form and color | Adhesive; Typical: Black |
| Mix ratio | Single-component |
| Working time at 25°C | Ready to use |
| Initial cure at 25°C | Typical: 15-30 min dry-to-touch |
| Full cure / cure conditions | 4-6 h |
| Service temperature | -30 to 80°C |
| Shear strength | 5.5 MPa |
| Hardness | Shore D 55 |
| Recommended application temperature | Recommended: 5°C to 35°C |
| Recommended bond-line thickness | Recommended: 0.2-1.0 mm bond line |
Questions about your operating conditions?
Conveyor Belt and Lining Repair
Conveyor belt damage repair
ZDS-RE3008 is made for repairing and rebuilding conveyor belts. Its elastomeric form suits flexible belt areas that need bonding or sealing during repair.
Protective lining repair
Use it for repair work on protective linings where the component condition and its movement matter. Inspect the contact area carefully so the repair matches the flexible part and its operating conditions.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Use the single-component product according to its handling instructions.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The working time at 25°C is Ready to use. Arrange the work area and tools before application.
What is the full-cure schedule?
Full cure: 4-6 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 5°C to 35°C. Service temperature: -30 to 80°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.2-1.0 mm bond line. Use the stated thickness type and range when planning the work.