ZDS-RE3007
ZDS-RE3007 Rapid Rubber Repair Compound
ZDS-RE3007 repairs and rebuilds damaged conveyor belts and protective linings. Its rapid-cure elastomer supports flexible bonding and sealing.
Product overview
Rapid rubber repair for flexible components
ZDS-RE3007 is a cold-applied adhesive for repairing and rebuilding conveyor belts and protective linings. It forms an elastomeric repair that can bond and seal flexible component areas.
Its rapid cure helps organize repair work around equipment downtime, while its flexible character matters when the component moves in service. The condition of the damaged area, the contact surface and the component’s operating movement are key factors when evaluating fit.
Key material properties
- Rapid cure: Use the product cure schedule to plan the work and equipment downtime.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3007 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3007 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Conveyor belts, protective linings |
| Form and color | Adhesive; Typical: Black |
| Working time at 25°C | Typical: 5-15 min |
| Initial cure at 25°C | Typical: 15-30 min |
| Full cure / cure conditions | 16 h |
| Service temperature | -40 to 85°C |
| Shear strength | 10 MPa |
| Hardness | Shore D 70 |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 2-10 mm |
Questions about your operating conditions?
Repair and rebuilding uses
Conveyor belt repairs
ZDS-RE3007 repairs and rebuilds damaged areas on conveyor belts. Its rapid-cure design can help reduce planned equipment downtime, while the elastomeric material suits components that continue to move during service.
Protective lining repairs
Use ZDS-RE3007 for repair work on protective linings where the damaged area and component movement guide product selection. Flexible bonding and sealing can support a repair that needs to accommodate movement rather than remain completely rigid.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 5-15 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 16 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -40 to 85°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 2-10 mm. Use the stated thickness type and range when planning the work.