ZDS-RE3001
ZDS-RE3001 Rubber Lining Repair Compound
ZDS-RE3001 repairs and rebuilds flexible protective linings on tanks, vessels and industrial pipelines. Its elastomeric form supports flexible bonding and sealing.
Product overview
Flexible rubber lining repair
ZDS-RE3001 is a cold-applied elastomeric compound for repairing and rebuilding protective linings on tanks, vessels and industrial pipelines. It bonds and seals flexible repair areas.
Its flexible material is useful where the component can move during service. Corrosion resistance also matters when the repaired lining faces corrosive conditions.
Key material properties
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3001 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3001 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Tanks and vessels, industrial pipelines, protective linings |
| Form and color | Adhesive; Typical: Black |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 150°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 2-10 mm |
Questions about your operating conditions?
Repair applications
Flexible lining repairs
ZDS-RE3001 repairs and rebuilds flexible protective linings in tanks and vessels. Its elastomeric form suits areas where the component or lining needs a flexible repair, while corrosion resistance matters in corrosive service conditions.
Pipeline and vessel maintenance
Use ZDS-RE3001 for repair work on industrial pipelines and vessels when the damaged area and component movement are important selection factors. Flexible bonding and sealing support repair areas that need to accommodate movement rather than remain rigid.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 150°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 2-10 mm. Use the stated thickness type and range when planning the work.