ZDS-MR5018
ZDS-MR5018 Nano-Ceramic Adhesive
ZDS-MR5018 supports bonding, repair and rebuilding on ceramic, glass-lined, glass and stone components, and industrial pipelines. Ceramic reinforcement supports its protective application.
Product overview
Nano-Ceramic Adhesive for Industrial Repair
ZDS-MR5018 is a nano-ceramic adhesive for bonding, repair and rebuilding on ceramic and glass-lined equipment, glass and stone components, and industrial pipelines.
Its multi-substrate compatibility helps match the adhesive to different contact materials, while ceramic reinforcement supports the protective application. Wet and underwater service capability helps distinguish service conditions that may involve water exposure from the conditions used during application.
Key material properties
- Wet-service capability: Distinguish the conditions during application from water exposure during service.
- Substrate compatibility: Match the actual contact material to the intended application.
- Ceramic reinforcement: A material feature for the protective application described for this product.
Evaluate the material
ZDS-MR5018 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-MR5018 |
| Product series | ZDS-MetalRebuild |
| Product family | Metal rebuilding & cold repair |
| Substrates and equipment | Ceramic and glass-lined equipment, glass and stone components, industrial pipelines |
| Form and color | Adhesive; Typical: Grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h at 25°C |
| Service temperature | Typical: -40°C to +120°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended bond-line thickness | Recommended: 0.2-1.0 mm bond line |
Questions about your operating conditions?
Where ZDS-MR5018 Fits
Bonding and Rebuilding Ceramic or Glass-Lined Equipment
ZDS-MR5018 is made for bonding, repair and rebuilding work on ceramic and glass-lined equipment, as well as glass and stone components. Its ceramic reinforcement supports the protective material role in these applications.
Repair Areas With Wet-Service Exposure
Use ZDS-MR5018 when the bonded area may encounter wet conditions during service. Confirm that the contact surfaces, access and bond area suit the planned repair before selecting the material.
Prepare the work surface
Prepare the bonding area using the product-specific preparation instructions.
- Identify the contact surfaces and inspect for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the bonding area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the adhesive to the prepared contact area according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h at 25°C. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: Typical: -40°C to +120°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.2-1.0 mm bond line. Use the stated thickness type and range when planning the work.