ZDS-MR5006
ZDS-MR5006 Fiberglass Repair Compound
ZDS-MR5006 repairs and rebuilds prepared metal, protective lining, glass, and stone components. Its paste form supports field application and shaping.
Product overview
Fiberglass repair compound for industrial components
ZDS-MR5006 is a paste compound for repairing and rebuilding prepared metal components, protective linings, and glass or stone components. It is intended for field-applied structural repair where the damaged area needs material placed and shaped on the component.
High adhesion to prepared industrial substrates helps the repair material bond to a properly prepared surface. The paste form supports controlled placement, while the product’s service-temperature range suits equipment exposed to changing operating conditions.
Key material properties
- Adhesion to prepared surfaces: Surface condition and preparation are important to the bond.
- Field application: Suitable for consideration in a planned on-site repair.
Evaluate the material
ZDS-MR5006 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-MR5006 |
| Product series | ZDS-MetalRebuild |
| Product family | Metal rebuilding & cold repair |
| Substrates and equipment | Glass and stone components, protective linings, metal components |
| Form and color | Paste; Typical: Grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 150°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 1-5 mm |
Questions about your operating conditions?
Repair and rebuilding applications
Field repair of industrial components
ZDS-MR5006 is used for repair and rebuilding on prepared metal components, protective linings, and glass or stone components. Its paste form supports placing and shaping material directly at the repair area during a planned field repair.
Choose by repair access and finished shape
Repair dimensions and access help determine whether this compound fits the job. Consider the size and shape of the damaged area, the available working space, and the need to rebuild a defined surface profile.
Prepare the work surface
Prepare the repair area using the product-specific preparation instructions.
- Inspect the damaged area and the surrounding component for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the repair area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Place and shape the repair material according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 150°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 1-5 mm. Use the stated thickness type and range when planning the work.