ZDS-FG2123
ZDS-FG2123 High-Temperature Enamel Repair Compound
ZDS-FG2123 protects boilers, ducts, furnace components, and industrial pipelines from demanding exposure. Its corrosion resistance supports barrier protection in high-temperature service.
Product overview
High-temperature enamel repair compound
ZDS-FG2123 is a protective coating for boilers, flue and air ducts, furnace and refractory components, and industrial pipelines. It forms a barrier on surfaces exposed to corrosion, heat, or aggressive fluids.
Its corrosion resistance and high-temperature service capability make it suitable when the coating area must remain protected in demanding industrial service. Selection should be based on the component, coverage area, and actual exposure.
Key material properties
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
- Temperature capability: Compare the service-temperature limits in the table with the operating conditions.
- Barrier protection: The fluid and exposure conditions matter when selecting the protective material.
Evaluate the material
ZDS-FG2123 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-FG2123 |
| Product series | ZDS-FluidGlide |
| Product family | High-temperature & chemical service |
| Substrates and equipment | Boilers, flue and air ducts, furnace and refractory components, industrial pipelines |
| Form and color | Coating; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 200°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Protective coating applications
Boilers, ducts and industrial pipelines
ZDS-FG2123 is used as a protective coating for boilers, flue and air ducts, furnace and refractory components, and industrial pipelines. It helps protect exposed surfaces where corrosion and aggressive fluids are part of the service environment.
Match the coating to the exposure
Choose this compound when the accessible coating area and its actual wear or fluid exposure fit a high-temperature, corrosion-resistant barrier material. Review the component, coverage area, and service conditions before selecting it for the job.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 200°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.