ZDS-FG1155
ZDS-FG1155 Peel-Resistant Anti-Corrosion Repair Compound
ZDS-FG1155 repairs and rebuilds damaged industrial components. It offers corrosion resistance and compatibility with ceramic, glass-lined and metal surfaces.
Product overview
Anti-Corrosion Repair Compound
ZDS-FG1155 Peel-Resistant Anti-Corrosion Repair Compound is intended for repair and rebuilding.
Application settings include Ceramic and glass-lined equipment, industrial pipelines, metal components. The damaged area and required finished shape determine how much material must be placed and where access is needed.
Key material properties
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
- Substrate compatibility: Match the actual contact material to the intended application.
- Peel resistance: Relevant where forces tend to separate a bond from an edge.
Evaluate the material
ZDS-FG1155 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-FG1155 |
| Product series | ZDS-FluidGlide |
| Product family | High-temperature & chemical service |
| Substrates and equipment | Ceramic and glass-lined equipment, industrial pipelines, metal components |
| Form and color | Coating; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 150°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Repair Applications
Rebuilding damaged equipment surfaces
ZDS-FG1155 is used to repair and rebuild damaged areas on ceramic and glass-lined equipment, industrial pipelines and metal components. Its corrosion resistance suits equipment exposed to corrosive conditions.
Choosing the right repair fit
Repair dimensions and access help determine whether the compound fits the job. Check that the full repair area can be reached and that the finished shape can be formed as required.
Prepare the work surface
Prepare the repair area using the product-specific preparation instructions.
- Inspect the damaged area and the surrounding component for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the repair area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Place and shape the repair material according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 150°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.