ZDS-CA1845
ZDS-CA1845 High-Temperature Silicon Carbide Wear Protection Compound
ZDS-CA1845 provides protective coating for wear-prone industrial surfaces. Its high wear resistance supports slurry, bulk-material and pipeline equipment.
Product overview
High-Temperature Wear Protection
ZDS-CA1845 is a paste compound for protective coatings on industrial surfaces in slurry, bulk-material, powder, ash and pipeline systems. It helps protect areas exposed to repeated wear, erosion or cavitation, which occurs when collapsing bubbles damage a surface.
Its high wear resistance and high-temperature service capability make it a practical fit for equipment where both material contact and heat affect the coating area. The right selection depends on the accessible coverage area and the exposure the surface will see.
Key material properties
- Wear resistance: A useful property when selecting material for worn industrial surfaces.
- Erosion and cavitation resistance: Identify the actual damage mechanism when selecting the repair material.
- Temperature capability: Compare the service-temperature limits in the table with the operating conditions.
Evaluate the material
ZDS-CA1845 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-CA1845 |
| Product series | ZDS-CeramicArmor |
| Product family | Wear & erosion protection |
| Substrates and equipment | Slurry and bulk-material systems, powder and ash handling systems, industrial pipelines |
| Form and color | Paste; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 250°C |
| Recommended application temperature | Recommended: 15°C to 35°C |
| Recommended application thickness | Recommended: 3-10 mm |
Questions about your operating conditions?
Where ZDS-CA1845 Fits
Protective coating for wear-prone industrial equipment
ZDS-CA1845 is used as a protective coating for slurry and bulk-material systems, powder and ash handling systems, and industrial pipelines. Its high wear resistance suits surfaces exposed to ongoing material contact.
Selection based on the exposure
Choose this compound when the coating area faces wear, erosion or cavitation from the process. Review the size and accessibility of the area together with the actual fluid or material exposure before planning the work.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 15°C to 35°C. Service temperature: -60 to 250°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 3-10 mm. Use the stated thickness type and range when planning the work.