ZDS-CA1840
ZDS-CA1840 Impact-Resistant Wear Protection Compound
ZDS-CA1840 protects pump casings, pipe fittings and industrial pipelines from demanding wear and impact. Its ceramic-filled compound provides high wear resistance.
Product overview
Impact-resistant wear protection
ZDS-CA1840 is a paste compound used as a protective coating for pumps, pump casings, pipe fittings and industrial pipeline surfaces. It provides ceramic-filled protection where equipment faces wear and impact.
High wear resistance helps the coating address material loss on exposed industrial surfaces, while impact resistance matters where the surface also receives repeated contact. The coating area and its operating exposure are key factors when assessing fit.
Key material properties
- Wear resistance: A useful property when selecting material for worn industrial surfaces.
- Impact resistance: A material property to consider when the component is exposed to impact.
- Ceramic-filled material: A protective material option for the equipment and exposure described for this product.
Evaluate the material
ZDS-CA1840 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-CA1840 |
| Product series | ZDS-CeramicArmor |
| Product family | Wear & erosion protection |
| Substrates and equipment | Pumps and pump casings, pipe elbows and tees, slurry and bulk-material systems, industrial pipelines |
| Form and color | Paste; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 150°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 3-10 mm |
Questions about your operating conditions?
Where ZDS-CA1840 fits
Protective coating for pumps and pipelines
ZDS-CA1840 is a ceramic-filled protective compound for pump casings, pipe elbows and tees, and industrial pipelines. Its wear resistance and impact resistance suit surfaces exposed to demanding material flow or contact.
Choose by coverage and exposure
Review the accessible coating area and the actual wear or fluid exposure before selecting this compound. These factors help determine whether its high-wear, impact-resistant protection matches the equipment surface and service conditions.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 150°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 3-10 mm. Use the stated thickness type and range when planning the work.