ZDS-CA1839
ZDS-CA1839 Wear-Resistant Ceramic Structural Adhesive
ZDS-CA1839 bonds ceramic protection to wear-prone industrial equipment. It combines ceramic reinforcement with high wear resistance and strong bonding performance.
Product overview
Ceramic adhesive for wear protection
ZDS-CA1839 is a structural adhesive for bonding ceramic protection to wear-prone industrial equipment. It is used on pipe elbows and tees, chutes and hoppers, ceramic and glass-lined equipment, and industrial pipelines.
High wear resistance, strong mechanical and bonding performance, and ceramic reinforcement matter when the bonded area must support a protective ceramic layer in an erosive service environment. The fit depends on the contact area, access for preparation and the equipment temperature.
Key material properties
- Wear resistance: A useful property when selecting material for worn industrial surfaces.
- Mechanical and bonding strength: Compare the material strength values with the requirements of the application.
- Ceramic reinforcement: A material feature for the protective application described for this product.
Evaluate the material
ZDS-CA1839 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-CA1839 |
| Product series | ZDS-CeramicArmor |
| Product family | Wear & erosion protection |
| Substrates and equipment | Pipe elbows and tees, chutes and hoppers, ceramic and glass-lined equipment, industrial pipelines |
| Form and color | Adhesive; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Service temperature | Typical: -40°C to +150°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Where ZDS-CA1839 fits
Bonding wear-prone equipment areas
ZDS-CA1839 bonds ceramic protection to equipment such as pipe elbows, pipe tees, chutes, hoppers and industrial pipelines. Its ceramic-reinforced formulation is suited to applications where the bonded area faces abrasive wear or erosion.
Choosing the right bonding area
Review the contact surface, available access and the equipment operating temperature before selecting this adhesive. These factors help determine whether the bonding area is practical to prepare and apply.
Prepare the work surface
Prepare the bonding area using the product-specific preparation instructions.
- Identify the contact surfaces and inspect for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the bonding area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the adhesive to the prepared contact area according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: Typical: -40°C to +150°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.