ZDS-RE3015
ZDS-RE3015 Metal Surface Treatment Agent
ZDS-RE3015 prepares metal contact surfaces before bonding. It is a single-component, ready-to-use treatment agent.
Product overview
Metal Surface Treatment for Bonding
ZDS-RE3015 is a surface treatment agent for preparing flanges, industrial pipelines, protective linings, and metal components before bonding. It is used on the contact surface as part of the bonding preparation stage.
The single-component, ready-to-use format supports straightforward handling during surface preparation. Selection should match the surface material and the adhesive or process that follows.
Key material properties
- Bonding preparation: Treats the surface as part of preparation for bonding.
- Ready-to-use treatment: A single-component treatment for the preparation stage.
Evaluate the material
ZDS-RE3015 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3015 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Flanges, industrial pipelines, protective linings, metal components |
| Form and color | Treatment agent; Typical: Clear to light amber |
| Supply form | Single-component |
| Use form | Ready to use |
| Dry-to-touch time at 25°C | Typical: 15-30 min dry-to-touch |
| Curing | No cure required |
| Application temperature | 5°C to 35°C |
| Pack size / net content | 500 g (single component) |
| Recommended application temperature | Recommended: 5°C to 35°C |
| Application guidance | Recommended: Thin uniform film |
Questions about your operating conditions?
Where ZDS-RE3015 Fits
Bonding preparation for metal components
ZDS-RE3015 prepares contact surfaces on flanges, industrial pipelines, protective linings, and other metal components before bonding. It helps make the surface ready for the next bonding step.
Selection for a planned bonding process
Choose this treatment when the surface material and the adhesive used next are known. Its single-component, ready-to-use format suits preparation work that must fit the selected adhesive and the area being treated.
Surface readiness
Prepare the surface to be treated using the product-specific preparation instructions.
- Inspect the contact surface and identify contamination that needs attention before treatment.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Plan the preparation process
- Prepare the surface to be treated and arrange access and tools before starting.
- Use the single-component product according to its handling instructions.
- Use the treatment according to its product instructions before the intended bonding step.
- Complete the preparation process before the next bonding or coating step.
Product selection questions
What temperatures apply?
Recommended application temperature: 5°C to 35°C.
Where is this product used?
ZDS-RE3015 is intended for surface preparation before bonding. Application settings include Flanges, industrial pipelines, protective linings, metal components.
What should I send for product guidance?
Send the surface material, the next adhesive or process and the area to be treated, plus the quantity you need.