ZDS-RE3013
ZDS-RE3013 Tire Repair Adhesive
ZDS-RE3013 repairs and rebuilds flexible areas on industrial tires, service vehicles and industrial pipelines. Its flexible, tear-resistant properties suit moving components.
Product overview
Flexible rubber repair adhesive
ZDS-RE3013 is a single-component adhesive for repairing and rebuilding flexible components on industrial tires, service vehicles and industrial pipelines. It is supplied ready to use, so no separate component-mixing step is needed.
Its flexibility and tear resistance matter when the repaired area moves during service. Mechanical and bonding strength also matter when selecting a material for the component’s repair requirements.
Key material properties
- Flexibility and tear resistance: Useful material properties for components that flex during use.
- Mechanical and bonding strength: Compare the material strength values with the requirements of the application.
- Single-component form: No separate component-mixing step is needed.
Evaluate the material
ZDS-RE3013 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3013 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Industrial tyres and service vehicles, industrial pipelines |
| Form and color | Adhesive; Typical: Black |
| Mix ratio | Single-component |
| Working time at 25°C | Ready to use |
| Initial cure at 25°C | Typical: 15-30 min dry-to-touch |
| Full cure / cure conditions | Typical Drying time: 15-30 min at 25°C |
| Service temperature | Typical: -30°C to +80°C |
| Pack size / net content | 30 ml (single component) |
| Recommended application temperature | Recommended: 5°C to 35°C |
| Recommended bond-line thickness | Recommended: 0.2-1.0 mm bond line |
Questions about your operating conditions?
Repair and selection fit
Industrial tire and service-vehicle repairs
ZDS-RE3013 is made for repairing and rebuilding flexible areas on industrial tires and service vehicles. Its flexible, tear-resistant material properties suit components that move during use, while the ready-to-use single-component form keeps handling straightforward.
Pipeline repair planning
For industrial pipeline repair work, choose ZDS-RE3013 after checking the component material, the condition of the damaged area and the movement it experiences. Its mechanical and bonding strength can help support a repair plan when those material requirements match the application.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Use the single-component product according to its handling instructions.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The working time at 25°C is Ready to use. Arrange the work area and tools before application.
What is the full-cure schedule?
Full cure: Typical Drying time: 15-30 min at 25°C. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 5°C to 35°C. Service temperature: Typical: -30°C to +80°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.2-1.0 mm bond line. Use the stated thickness type and range when planning the work.