ZDS-RE3011
ZDS-RE3011 Marine Cable Joint Vulcanizing Compound
ZDS-RE3011 seals industrial cables and joints with a flexible elastomeric bond. It suits marine and industrial areas exposed to wet service.
Product overview
Marine Cable Joint Sealing
ZDS-RE3011 is a cold-applied elastomeric compound for sealing industrial cables, joints and other listed marine or industrial components. It forms a flexible bond and seal where the component may move in service.
The material is suited to jobs that need flexibility and wet-service capability. Check the condition of the contact area and the component’s operating conditions to confirm that the product fits the task.
Key material properties
- Wet-service capability: Distinguish the conditions during application from water exposure during service.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3011 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3011 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Offshore platforms, marine structures, industrial cables and joints, industrial pipelines |
| Form and color | Adhesive; Typical: Black |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h at 25°C |
| Service temperature | Typical: -30°C to +80°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 2-10 mm |
Questions about your operating conditions?
Sealing Flexible Cable Joints
Industrial cable and joint sealing
ZDS-RE3011 is used to seal industrial cables and joints where a flexible elastomeric material suits the contact area. Its cold-applied format supports repair and sealing work on flexible components in marine and industrial settings.
Fit for movement and wet service
Review the component condition, expected movement and operating environment before selecting this compound. Flexible bonding and sealing can suit areas that must remain flexible, while wet and underwater service capability is relevant when water exposure occurs during service.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h at 25°C. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: Typical: -30°C to +80°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 2-10 mm. Use the stated thickness type and range when planning the work.