ZDS-RE3010
ZDS-RE3010 Flame-Retardant Mining Cable Cold-Patch Compound
ZDS-RE3010 repairs and rebuilds industrial cables and joints. Its elastomeric formulation supports flexible bonding and sealing with flame-resistant performance.
Product overview
Flexible Cable and Joint Repair
ZDS-RE3010 is a cold-applied compound for repairing and rebuilding industrial cables and joints. It forms a flexible bond and seal for repair areas on flexible components.
Its elastomeric material suits repairs where movement matters, while flame-resistant performance supports selection for the intended equipment application. The component condition and its operating environment help determine whether this repair compound fits the job.
Key material properties
- Flame resistance: A material property to consider for the intended equipment application.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3010 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3010 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Industrial cables and joints |
| Form and color | Adhesive; Typical: Black |
| Working time at 25°C | Typical: 15-25 min |
| Initial cure at 25°C | Typical: 30-45 min |
| Full cure / cure conditions | 2 h |
| Service temperature | -40 to 85°C |
| Shear strength | 10 MPa |
| Hardness | Shore D 72 |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 2-10 mm |
Questions about your operating conditions?
Industrial Cable Repair and Selection
Repair industrial cables and joints
ZDS-RE3010 is made for repairing and rebuilding industrial cables and joints. Its cold-applied elastomer form supports flexible bonding and sealing where the repair area must accommodate component movement.
Choose for the equipment environment
Flame-resistant performance is a useful selection factor for cable and joint repair in industrial equipment. Review the condition of the damaged area, the movement of the component and the operating conditions before choosing the material.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 15-25 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 2 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -40 to 85°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 2-10 mm. Use the stated thickness type and range when planning the work.