ZDS-RE3006
ZDS-RE3006 Rapid Rubber Repair Compound
ZDS-RE3006 repairs and rebuilds flexible conveyor belts, industrial pipelines and protective linings. Its elastomeric compound supports flexible bonding and sealing.
Product overview
Rapid Rubber Repair Compound
ZDS-RE3006 is an adhesive compound for repairing and rebuilding flexible industrial components such as conveyor belts, industrial pipelines and protective linings.
Its elastomeric, or rubber-like and flexible, repair material supports bonding and sealing where the repaired area needs to accommodate component movement. The rapid cure can help organize repair work around equipment downtime.
Key material properties
- Rapid cure: Use the product cure schedule to plan the work and equipment downtime.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3006 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3006 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Conveyor belts, industrial pipelines, protective linings |
| Form and color | Adhesive; Typical: Black |
| Working time at 25°C | Typical: 5-15 min |
| Initial cure at 25°C | Typical: 15-30 min |
| Full cure / cure conditions | 16 h |
| Service temperature | -40 to 85°C |
| Shear strength | 10 MPa |
| Hardness | Shore D 70 |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 2-10 mm |
Questions about your operating conditions?
Repair Flexible Industrial Components
Conveyor belt and lining repairs
ZDS-RE3006 repairs and rebuilds damaged areas on conveyor belts and protective linings. Its elastomeric form helps create a flexible repair, while the rapid cure can help reduce planned equipment downtime.
Repairs where movement matters
This compound suits repair or bonding tasks where the component can flex during service. Inspect the damage, loose material and contamination first, then consider the component condition and movement when selecting the repair approach.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 5-15 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 16 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -40 to 85°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 2-10 mm. Use the stated thickness type and range when planning the work.