ZDS-RE3005
ZDS-RE3005 EPDM Rubber Adhesive
ZDS-RE3005 bonds and seals protective linings on industrial pipelines. Its elastomeric formulation suits flexible bond and seal tasks.
Product overview
EPDM rubber bonding and sealing
ZDS-RE3005 is an EPDM rubber adhesive for bonding and sealing protective linings on industrial pipelines. EPDM is a flexible synthetic rubber used in elastomer components.
Its elastomeric character supports applications where the bond or seal needs flexibility. The practical fit depends on the component condition, contact area, and movement during service.
Key material properties
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3005 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3005 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Industrial pipelines, protective linings |
| Form and color | Adhesive; Typical: Black |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -35 to 120°C |
| Shear strength | 5 MPa |
| Hardness | Shore D 65 |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended bond-line thickness | Recommended: 0.2-1.0 mm bond line |
Questions about your operating conditions?
Bonding and sealing applications
Protective lining bonds
ZDS-RE3005 bonds and seals protective linings used on industrial pipelines. Its elastomeric formulation suits a bond or seal where the joined material needs to remain flexible.
Flexible component selection
Choose this adhesive when the condition of the flexible component and its expected movement are central to the task. Inspect the contact area so the material matches the actual bonding or sealing need.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -35 to 120°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.2-1.0 mm bond line. Use the stated thickness type and range when planning the work.