ZDS-RE3004
ZDS-RE3004 Conveyor Belt Wear-Armor Coating
ZDS-RE3004 coats conveyor belt surfaces with a cold-applied elastomeric material. It offers high wear resistance for flexible industrial components.
Product overview
Conveyor Belt Wear Protection
ZDS-RE3004 is a protective coating for conveyor belts. It provides a cold-applied elastomeric layer for flexible industrial components.
High wear resistance matters on surfaces exposed to repeated contact. Flexible bonding and sealing also support selection where the coated area must remain compatible with component movement.
Key material properties
- Wear resistance: A useful property when selecting material for worn industrial surfaces.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3004 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3004 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Conveyor belts |
| Form and color | Coating; Typical: Black |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 100°C |
| Shear strength | 10 MPa |
| Hardness | Shore D 85 |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 2-10 mm |
Questions about your operating conditions?
Conveyor Belt Coating Applications
Protective coating for conveyor belts
ZDS-RE3004 is a cold-applied elastomeric coating for conveyor belt surfaces. Its high wear resistance suits industrial areas where the coated surface is exposed to repeated contact and movement.
Fit for moving flexible components
Choose this coating when the belt and contact area need a flexible material that can also bond and seal. Inspect the component condition, movement, damage, loose material and contamination before selecting it for the job.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 100°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 2-10 mm. Use the stated thickness type and range when planning the work.