ZDS-RE3003
ZDS-RE3003 High-Strength Cold-Vulcanizing Rubber Adhesive
ZDS-RE3003 bonds conveyor belts, protective linings and metal components. Its elastomeric formulation supports flexible bonding and sealing.
Product overview
Flexible rubber bonding
ZDS-RE3003 is a cold-vulcanizing rubber adhesive for bonding conveyor belts, protective linings and metal components. It is applied without a separate heat-vulcanizing step.
Its elastomeric behavior supports flexible bonding and sealing, while its high mechanical and bonding strength suits components that move during use. The condition of the contact area and the amount of component movement are key fit factors.
Key material properties
- Mechanical and bonding strength: Compare the material strength values with the requirements of the application.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
- Flexible bonding and sealing: Relevant where the bond or seal needs flexibility.
Evaluate the material
ZDS-RE3003 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3003 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Conveyor belts, protective linings, metal components |
| Form and color | Adhesive; Typical: Black |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -35 to 120°C |
| Shear strength | 5 MPa |
| Hardness | Shore D 65 |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended bond-line thickness | Recommended: 0.2-1.0 mm bond line |
Questions about your operating conditions?
Rubber bonding applications
Conveyor belts and protective linings
ZDS-RE3003 bonds flexible conveyor belt materials and protective linings. Its elastomeric formulation suits bonding and sealing areas that need to accommodate component movement.
Metal component bonding
Use ZDS-RE3003 where a flexible component meets a metal component. The high mechanical and bonding strength helps guide selection when the joint must remain flexible during service.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -35 to 120°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.2-1.0 mm bond line. Use the stated thickness type and range when planning the work.