ZDS-RE3002
ZDS-RE3002 High-Temperature Rubber Conveyor Belt Adhesive
ZDS-RE3002 repairs and rebuilds damaged conveyor belt areas. Its cold-applied elastomeric form supports flexible components and rapid maintenance work.
Product overview
High-Temperature Conveyor Belt Repair Adhesive
ZDS-RE3002 repairs and rebuilds flexible conveyor belt areas with a cold-applied elastomeric adhesive. It is intended for conveyor belt maintenance where the damaged area must remain compatible with component movement.
Rapid cure helps reduce the time planned for repair work, while high-temperature service capability matters when the belt operates in a hot environment. The belt’s condition, movement, and operating conditions are key fit factors.
Key material properties
- Rapid cure: Use the product cure schedule to plan the work and equipment downtime.
- Temperature capability: Compare the service-temperature limits in the table with the operating conditions.
- Cold-applied repair: An elastomeric repair option for the stated flexible components.
Evaluate the material
ZDS-RE3002 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-RE3002 |
| Product series | ZDS-RubberElast |
| Product family | Rubber & elastomer repair |
| Substrates and equipment | Conveyor belts |
| Form and color | Adhesive; Typical: Black |
| Working time at 25°C | Typical: 5-15 min |
| Initial cure at 25°C | Typical: 15-30 min |
| Full cure / cure conditions | 24 h |
| Service temperature | -40 to 150°C |
| Shear strength | 3.5 MPa |
| Hardness | Shore D 65 |
| Dielectric strength | 16 kV/mm |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended bond-line thickness | Recommended: 0.2-1.0 mm bond line |
Questions about your operating conditions?
Conveyor Belt Repair Applications
Repair Damaged Conveyor Belt Areas
ZDS-RE3002 is a cold-applied elastomeric adhesive for repairing and rebuilding damaged areas on conveyor belts. Its rapid cure can help organize maintenance work around equipment downtime.
Choose for Flexible, Heat-Exposed Components
Review the belt’s condition, movement, and operating temperature when selecting this adhesive. Its elastomeric form suits flexible conveyor belt repair, while its high-temperature service capability supports consideration for belts exposed to elevated heat.
Prepare the work surface
Prepare the flexible component using the product-specific preparation instructions.
- Inspect the flexible component and contact area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the flexible component and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the material to the prepared area using the product-specific repair, bonding or coating method.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 5-15 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -40 to 150°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.2-1.0 mm bond line. Use the stated thickness type and range when planning the work.