ZDSPA1600
ZDSPA1600 Clear Weather-Proof Armor
ZDSPA1600 provides a clear protective coating for offshore platforms and industrial pipelines. It combines outdoor weathering resistance with a high-gloss finish.
Product overview
Clear Exterior Protection
ZDSPA1600 is a clear protective topcoat for offshore platforms and industrial pipelines. It is used to add a weather-resistant protective layer to an existing surface.
Weathering and ultraviolet (UV) resistance matter when a coating faces outdoor conditions. The clear, high-gloss finish suits applications where the underlying surface should remain visible while receiving exterior protection.
Key material properties
- Weathering and UV resistance: Relevant to protective applications exposed to outdoor conditions.
- Clear gloss finish: Provides a clear, high-gloss protective finish.
- Exterior durability: Intended for protective applications exposed to outdoor conditions.
Evaluate the material
ZDSPA1600 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDSPA1600 |
| Product series | ZDS-PolyAspartic |
| Product family | Outdoor protective topcoats |
| Substrates and equipment | Offshore platforms, industrial pipelines |
| Form and color | Coating; Clear |
| Working time at 25°C | Typical: 15-25 min |
| Initial cure at 25°C | 2 h |
| Cure / service condition | Ambient-cure protective service |
| Tensile strength | 25 MPa |
| Bond strength | ≥6 MPa |
| Elongation | 150% |
| Recommended application temperature | Recommended: 5°C to 35°C |
| Recommended thickness per coat | Recommended: 0.2-0.4 mm / coat |
Questions about your operating conditions?
Exterior Protective Coating Applications
Offshore platform surfaces
ZDSPA1600 is a clear protective coating for offshore platform surfaces exposed to outdoor weather and ultraviolet light. Its high-gloss finish can preserve a clear appearance while adding an exterior protective layer.
Industrial pipeline exteriors
ZDSPA1600 fits industrial pipeline coating tasks where the surface area and exposure conditions guide material selection. Its weathering resistance and long-term exterior durability support outdoor protective coating work.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 15-25 min. Complete surface preparation and setup before mixing.
What temperatures apply?
Recommended application temperature: 5°C to 35°C.
What thickness is recommended?
Recommended: 0.2-0.4 mm / coat. Use the stated thickness type and range when planning the work.