ZDS-FG2117
ZDS-FG2117 Flexible High-Temperature Sealant
ZDS-FG2117 seals flanges and industrial pipelines. It combines high-temperature service capability with flexible, tear-resistant performance.
Product overview
Flexible high-temperature sealing
ZDS-FG2117 is a flexible sealant for sealing flanges and industrial pipelines. It forms a sealing material for joints or gaps where the operating conditions call for high-temperature service capability.
Its flexibility and tear resistance are useful when sealed components flex during use. Electrical insulation is also a relevant property for sealing areas near electrical service, while gap geometry, contained fluid and operating temperature help determine fit.
Key material properties
- Temperature capability: Compare the service-temperature limits in the table with the operating conditions.
- Flexibility and tear resistance: Useful material properties for components that flex during use.
- Electrical insulation: A material property relevant to the stated electrical repair application.
Evaluate the material
ZDS-FG2117 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-FG2117 |
| Product series | ZDS-FluidGlide |
| Product family | High-temperature & chemical service |
| Substrates and equipment | Flanges, industrial pipelines |
| Form and color | Adhesive; Typical: Dark grey |
| Working time at 25°C | Typical: 15-25 min |
| Initial cure at 25°C | Typical: 30-45 min |
| Full cure / cure conditions | 24-72 h |
| Service temperature | -60 to 450°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Flange and pipeline sealing
Industrial flange sealing
ZDS-FG2117 seals flange interfaces on industrial equipment. Its flexible, tear-resistant performance suits sealing areas where components may move during use, while electrical insulation can matter when the joint is near electrical service.
Pipeline joint selection
Use ZDS-FG2117 for sealing areas on industrial pipelines when the gap geometry, contained fluid and operating temperature fit the application. Its high-temperature service capability helps with pipeline systems that experience demanding operating conditions.
Prepare the work surface
Prepare the sealing area using the product-specific preparation instructions.
- Inspect the sealing faces or gap for loose material, contamination and access.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the sealing area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the sealing material according to the product instructions for the actual joint or gap.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 15-25 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24-72 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 450°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.