ZDS-FG2114
ZDS-FG2114 300°C High-Temperature Enamel Repair Compound
ZDS-FG2114 repairs and rebuilds damaged areas on boilers, flue ducts and industrial pipelines. It provides corrosion resistance and barrier protection for high-temperature service.
Product overview
High-temperature repair compound
ZDS-FG2114 is a coating compound for repairing and rebuilding damaged areas on boilers, flue and air ducts, and industrial pipelines.
Its corrosion resistance, barrier protection against aggressive fluids, and high-temperature service capability make it suitable for repair areas exposed to demanding fluid and heat conditions.
Key material properties
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
- Temperature capability: Compare the service-temperature limits in the table with the operating conditions.
- Barrier protection: The fluid and exposure conditions matter when selecting the protective material.
Evaluate the material
ZDS-FG2114 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-FG2114 |
| Product series | ZDS-FluidGlide |
| Product family | High-temperature & chemical service |
| Substrates and equipment | Boilers, flue and air ducts, industrial pipelines |
| Form and color | Coating; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 300°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Repair and rebuilding applications
Industrial equipment repair
ZDS-FG2114 is used to repair and rebuild damaged areas on boilers, flue and air ducts, and industrial pipelines. Its corrosion resistance and barrier protection suit equipment exposed to aggressive fluids.
Selection by repair fit
Choose this compound when the repair dimensions and access match the work area and when the equipment operates within the product’s high-temperature service range. The damaged shape and available access affect material placement and the finished repair.
Prepare the work surface
Prepare the repair area using the product-specific preparation instructions.
- Inspect the damaged area and the surrounding component for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the repair area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Place and shape the repair material according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 300°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.