ZDS-FG4018
ZDS-FG4018 Ultimate Acid-Storage Tank Liner
ZDS-FG4018 protects industrial pipelines and metal components from aggressive fluid exposure. Its corrosion resistance supports demanding thermal service.
Product overview
Acid-storage tank liner
ZDS-FG4018 is a protective coating for industrial pipelines and metal components. It forms a barrier for surfaces exposed to aggressive fluids and corrosive conditions.
Its corrosion resistance and suitability for demanding thermal service help guide material selection when the coating area faces chemical exposure. Match the product to the component, coverage area and operating exposure.
Key material properties
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
- Barrier protection: The fluid and exposure conditions matter when selecting the protective material.
- Thermal-service applications: Use the stated temperature limits to compare the operating conditions.
Evaluate the material
ZDS-FG4018 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-FG4018 |
| Product series | ZDS-FluidGlide |
| Product family | High-temperature & chemical service |
| Substrates and equipment | Industrial pipelines, metal components |
| Form and color | Coating; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | 20-24 h |
| Tack-free time | 20-24h, Full cure: 7 days |
| Service temperature | 80°C / 120°C |
| Hardness | >3H |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Where the liner fits
Protective coating for metal components
Use ZDS-FG4018 as a protective coating on metal components exposed to corrosive conditions or aggressive fluids. Its barrier protection helps separate the metal surface from the exposure.
Coating work on industrial pipelines
ZDS-FG4018 suits coating areas on industrial pipelines where corrosion resistance and demanding thermal service are important selection factors. Consider the accessible coverage area together with the actual fluid and wear exposure.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: 80°C / 120°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.