ZDS-AS2187
ZDS-AS2187 Marine Engineering Equipment Protection Coating
ZDS-AS2187 protects offshore platforms, marine structures and industrial pipelines with a waterproof coating. It adheres to damp and submerged substrates.
Product overview
Marine Equipment Protection Coating
ZDS-AS2187 is a protective coating for offshore platforms, marine structures and industrial pipelines. It is intended for wet-surface and underwater repair work where equipment needs a waterproof coating option.
Its adhesion to damp and submerged substrates matters when water cannot be fully excluded from the work area. The coating is also designed for water exposure during service, helping buyers assess its fit for marine equipment and industrial pipeline protection.
Key material properties
- Wet-service capability: Distinguish the conditions during application from water exposure during service.
- Damp and submerged surfaces: An adhesion property relevant to work on wet or submerged substrates.
- Waterproof repair material: A material option for the stated field-repair application.
Evaluate the material
ZDS-AS2187 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-AS2187 |
| Product series | ZDS-AquaShield |
| Product family | Wet-surface & underwater repair |
| Substrates and equipment | Offshore platforms, marine structures, industrial pipelines |
| Form and color | Coating; Typical: Grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 150°C |
| Recommended application temperature | Recommended: 0°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Where ZDS-AS2187 Fits
Protection for Marine and Pipeline Equipment
ZDS-AS2187 is a protective coating for offshore platforms, marine structures and industrial pipelines. It provides a waterproof material option for field repair work on equipment exposed to marine conditions.
Selection for Damp or Submerged Work Areas
Choose this coating when the surface may be damp or submerged during the work and the equipment will face water exposure in service. Its adhesion to damp and submerged substrates helps match the coating to difficult access and wet work areas.
Prepare the work surface
Prepare the work area using the product-specific preparation instructions.
- Inspect the accessible surface and identify contamination and the water conditions during the proposed work.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the work area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Follow the product instructions for placement and the permitted surface-moisture conditions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 0°C to 35°C. Service temperature: -60 to 150°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.