ZDS-AS2186
ZDS-AS2186 Submerged-Asset Protective Coating
ZDS-AS2186 protects, repairs and rebuilds accessible areas on marine structures and industrial pipelines. It provides corrosion and chemical-media resistance.
Product overview
Submerged-Asset Protective Coating
ZDS-AS2186 is a coating for protecting, repairing and rebuilding accessible areas on marine structures and industrial pipelines. It is suited to work where the equipment may remain in underwater service after the repair.
Corrosion resistance helps the coating address exposure that can damage these assets. Its resistance to chemical media can also matter when the pipeline or structure contacts a known fluid. Identify the service exposure and water conditions before selecting it.
Key material properties
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
- Chemical resistance: Identify the fluid, concentration and temperature when discussing suitability.
Evaluate the material
ZDS-AS2186 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-AS2186 |
| Product series | ZDS-AquaShield |
| Product family | Wet-surface & underwater repair |
| Substrates and equipment | Marine structures, industrial pipelines |
| Form and color | Coating; Typical: Grey |
| Working time at 25°C | Typical: 5-15 min |
| Service temperature | Suitable for underwater service and 0°C conditions |
| Tensile strength | ≥25 MPa |
| Compressive strength | ≥50 MPa |
| Flexural strength | ≥30 MPa |
| Recommended application temperature | Recommended: 0°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Where ZDS-AS2186 Fits
Marine structure coating repair
Use ZDS-AS2186 for protective coating, repair and rebuilding work on marine structures. Its corrosion resistance suits equipment that remains exposed to corrosive conditions during service, including underwater service.
Industrial pipeline protection
ZDS-AS2186 also supports protective coating and repair work on industrial pipelines. Check the fluid, concentration and temperature when chemical exposure matters, and confirm that the accessible work area matches the planned repair.
Prepare the work surface
Prepare the work area using the product-specific preparation instructions.
- Inspect the accessible surface and identify contamination and the water conditions during the proposed work.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the work area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Follow the product instructions for placement and the permitted surface-moisture conditions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 5-15 min. Complete surface preparation and setup before mixing.
What temperatures apply?
Recommended application temperature: 0°C to 35°C. Service temperature: Suitable for underwater service and 0°C conditions. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.