ZDS-AS1002
ZDS-AS1002 Underwater Rebuilding Putty
ZDS-AS1002 repairs and rebuilds localized areas on wet or submerged equipment. Its wet-service capability suits repairs where water is present during work or service.
Product overview
Underwater rebuilding putty for wet repairs
ZDS-AS1002 is a putty for repairing and rebuilding localized areas on marine structures, tanks and vessels, pools and water features, and industrial pipelines. It is designed for wet-surface and underwater repair work.
Wet-service capability helps address repairs where water is present during the work or during equipment service. Chemical-media resistance can support selection where fluid contact matters, provided the specific fluid, concentration, and temperature are checked.
Key material properties
- Chemical resistance: Identify the fluid, concentration and temperature when discussing suitability.
- Rapid cure: Use the product cure schedule to plan the work and equipment downtime.
- Wet-service capability: Distinguish the conditions during application from water exposure during service.
Evaluate the material
ZDS-AS1002 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-AS1002 |
| Product series | ZDS-AquaShield |
| Product family | Wet-surface & underwater repair |
| Substrates and equipment | Marine structures, tanks and vessels, pools and water features, industrial pipelines |
| Form and color | Putty; Typical: Grey |
| Working time at 25°C | 3-6 min |
| Initial cure at 25°C | 5-10 min |
| Full cure / cure conditions | 24 h |
| Service temperature | Continuous: 80 to 90°C; short-term: 120°C |
| Tensile strength | 12-18 MPa |
| Compressive strength | 55-75 MPa |
| Hardness | Shore D 75-85 |
| Recommended application temperature | Recommended: 0°C to 35°C |
| Recommended application thickness | Recommended: 3-10 mm |
Questions about your operating conditions?
Wet-surface repair applications
Repair damp or submerged equipment areas
Use ZDS-AS1002 for localized repair and rebuilding on marine structures, tanks and vessels, pools, water features, and industrial pipelines. Its wet-service capability fits work areas that remain damp or submerged during the repair, subject to the permitted surface conditions.
Plan for water and chemical exposure
Choose this putty when the repaired area will contact water or other chemical media in service. Confirm the fluid, concentration, temperature, and access conditions before selecting the material for the job.
Prepare the work surface
Prepare the work area using the product-specific preparation instructions.
- Inspect the accessible surface and identify contamination and the water conditions during the proposed work.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the work area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Follow the product instructions for placement and the permitted surface-moisture conditions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The working time at 25°C is 3-6 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 0°C to 35°C. Service temperature: Continuous: 80 to 90°C; short-term: 120°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 3-10 mm. Use the stated thickness type and range when planning the work.