ZDS-CA1844
ZDS-CA1844 Brushable High-Temperature Nano Anti-Corrosion Coating
ZDS-CA1844 is a brushable protective coating for industrial equipment exposed to corrosion. It supports high-temperature service and accessible coating work.
Product overview
Brushable High-Temperature Corrosion Protection
ZDS-CA1844 is a brushable protective coating for industrial equipment such as heat exchangers, boilers, ducts and pipelines. It helps protect coating areas exposed to corrosion during high-temperature service.
Its brushable form supports work on accessible surfaces, while its service-temperature capability helps with material selection for equipment that operates across a wide temperature range. Compare the equipment conditions with the product limits before planning the coating task.
Key material properties
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
- Temperature capability: Compare the service-temperature limits in the table with the operating conditions.
- Brushable application: Brush application can help reach the intended coating area.
Evaluate the material
ZDS-CA1844 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-CA1844 |
| Product series | ZDS-CeramicArmor |
| Product family | Wear & erosion protection |
| Substrates and equipment | Heat exchangers and tube sheets, boilers, flue and air ducts, industrial pipelines |
| Form and color | Coating; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 36 h |
| Service temperature | -60 to 260°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Where ZDS-CA1844 Fits
Protective coating for industrial equipment
ZDS-CA1844 is used as a protective coating on heat exchangers and tube sheets, boilers, flue and air ducts, and industrial pipelines. Its corrosion resistance makes it suitable for coating areas exposed to corrosive conditions.
Selection for accessible exposed areas
Brushable application helps reach the intended coating area when the surface can be accessed by hand. Select the material by reviewing the size of the area and its actual wear or fluid exposure, along with the equipment’s operating temperature.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 36 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 260°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.