ZDS-CA1843
ZDS-CA1843 Brushable Enamel Wear Protection Coating
ZDS-CA1843 is a brushable protective coating for industrial surfaces exposed to wear. Its ceramic-filled formulation provides high wear resistance for severe service coating areas.
Product overview
Brushable Ceramic Wear Protection
ZDS-CA1843 is a protective coating for industrial equipment surfaces exposed to wear. It can be used on components such as pump casings, valves, tanks, vessels, impellers, heat exchangers, tube sheets, and industrial pipelines.
Its ceramic-filled material and high wear resistance provide a practical protection option for severe service coating areas. The brushable form helps apply the coating across an accessible surface while matching the equipment and exposure to the planned work.
Key material properties
- Wear resistance: A useful property when selecting material for worn industrial surfaces.
- Brushable application: Brush application can help reach the intended coating area.
- Ceramic-filled material: A protective material option for the equipment and exposure described for this product.
Evaluate the material
ZDS-CA1843 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-CA1843 |
| Product series | ZDS-CeramicArmor |
| Product family | Wear & erosion protection |
| Substrates and equipment | Heat exchangers and tube sheets, pumps and pump casings, valves, tanks and vessels, impellers, industrial pipelines |
| Form and color | Coating; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 60 h |
| Service temperature | -60 to 160°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Industrial Wear Protection Applications
Equipment surfaces exposed to wear
ZDS-CA1843 is a brushable protective coating for heat exchangers and tube sheets, pumps and pump casings, valves, tanks and vessels, impellers, and industrial pipelines. Its high wear resistance and ceramic-filled formulation suit coating areas that face severe service wear.
Choosing the right coating area
Consider the accessible surface area and the actual wear or fluid exposure when planning the job. Brushable application can help reach the intended area on equipment where the coating task requires careful coverage.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 60 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 160°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.