ZDS-CA1833
ZDS-CA1833 Silicon Carbide Wear-Resistant Protection Compound
ZDS-CA1833 protects industrial pump, pipe and duct surfaces from wear, erosion and cavitation. Its ceramic-filled composition supports demanding wear-protection coating tasks.
Product overview
Silicon Carbide Wear Protection
ZDS-CA1833 is a silicon carbide wear-resistant protection compound for coating pumps, pipe sections, ducts and slurry or bulk-material equipment. It forms a ceramic-filled protective layer for industrial surfaces exposed to wear, erosion or cavitation.
Its high wear resistance helps address demanding contact and flow conditions on the listed equipment. The actual damage mechanism, accessible surface area and fluid or material exposure are key factors when selecting it for a coating task.
Key material properties
- Wear resistance: A useful property when selecting material for worn industrial surfaces.
- Erosion and cavitation resistance: Identify the actual damage mechanism when selecting the repair material.
- Ceramic-filled material: A protective material option for the equipment and exposure described for this product.
Evaluate the material
ZDS-CA1833 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-CA1833 |
| Product series | ZDS-CeramicArmor |
| Product family | Wear & erosion protection |
| Substrates and equipment | Pumps and pump casings, pipe elbows and tees, flue and air ducts, slurry and bulk-material systems, industrial pipelines |
| Form and color | Paste; Typical: Dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 150°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 3-10 mm |
Questions about your operating conditions?
Where ZDS-CA1833 Fits
Protect pump and pipeline wear areas
Use ZDS-CA1833 as a protective coating for pump casings, pipe elbows and tees, industrial pipelines, and similar wear areas. Its high wear resistance and ceramic-filled composition suit surfaces exposed to erosion or cavitation.
Match coverage to the exposure
Consider this material when an accessible coating area faces wear from slurry, bulk material, air flow or fluid movement. The component size, surface area and actual exposure help define whether this coating is a practical fit for the task.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 150°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 3-10 mm. Use the stated thickness type and range when planning the work.