ZDS-CA1828
ZDS-CA1828 Coarse-Particle Impact Shield
ZDS-CA1828 protects and rebuilds coating areas on chutes, hoppers and related bulk-material equipment. It combines high wear resistance with corrosion resistance.
Product overview
Coarse-Particle Impact Shield
ZDS-CA1828 is a protective coating for repairing, rebuilding and lining wear-prone areas in bulk-material equipment. It is suited to chutes, hoppers, cyclones, separators and slurry systems.
High wear resistance helps address repeated material contact, while corrosion resistance supports selection for corrosive exposure. Its temperature capability also matters when the coated equipment operates across changing or elevated temperatures.
Key material properties
- Wear resistance: A useful property when selecting material for worn industrial surfaces.
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
- Temperature capability: Compare the service-temperature limits in the table with the operating conditions.
Evaluate the material
ZDS-CA1828 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-CA1828 |
| Product series | ZDS-CeramicArmor |
| Product family | Wear & erosion protection |
| Substrates and equipment | Chutes and hoppers, cyclones, separators, slurry and bulk-material systems, protective linings |
| Form and color | Coating; Typical: Dark grey |
| Initial cure at 25°C | Typical: 30-45 min |
| Service temperature | -60°C to +168°C |
| Tensile strength | ≥33Mpa |
| Shear strength | ≥16Mpa |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Where ZDS-CA1828 Fits
Protective coating for wear-prone equipment
Use ZDS-CA1828 to protect or rebuild coating areas on chutes, hoppers, cyclones, separators and related bulk-material systems. Its high wear resistance suits surfaces exposed to repeated contact with coarse material.
Selection based on exposure and coverage
Choose this coating when the area has both wear and corrosion concerns, or when the equipment operates at elevated temperature. Review the size of the accessible area and its actual wear or fluid exposure when planning the coating task.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60°C to +168°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.
Where is this product used?
ZDS-CA1828 is intended for protective coating, repair and rebuilding. Application settings include Chutes and hoppers, cyclones, separators, slurry and bulk-material systems, protective linings.