ZDS-CA1826
ZDS-CA1826 Fine-Particle Wear Resistant Coating
ZDS-CA1826 protects and rebuilds worn surfaces on industrial equipment. Its wear and corrosion resistance suits abrasive or corrosive exposure.
Product overview
Fine-Particle Wear Protection
ZDS-CA1826 is a protective coating for repairing and rebuilding worn surfaces on industrial equipment. It is used on components such as pump casings, impellers, vessels, pipelines, and slurry or bulk-material systems.
Its wear resistance helps address abrasive exposure, while corrosion resistance matters where equipment also contacts corrosive service conditions. The thixotropic consistency helps the coating stay where it is placed during application.
Key material properties
- Non-sag consistency: Helps the material stay where it is placed.
- Wear resistance: A useful property when selecting material for worn industrial surfaces.
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
Evaluate the material
ZDS-CA1826 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-CA1826 |
| Product series | ZDS-CeramicArmor |
| Product family | Wear & erosion protection |
| Substrates and equipment | Pumps and pump casings, tanks and vessels, impellers, slurry and bulk-material systems, powder and ash handling systems, industrial pipelines |
| Form and color | Coating; Typical: Dark grey |
| Initial cure at 25°C | Typical: 15-30 min |
| Service temperature | -60°C to +160°C |
| Tensile strength | ≥33Mpa |
| Shear strength | ≥16Mpa |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended thickness per coat | Recommended: 0.5-1.0 mm / coat |
Questions about your operating conditions?
Where ZDS-CA1826 Fits
Protective Coating for Wear-Prone Equipment
Use ZDS-CA1826 for protective coating, repair and rebuilding on pumps and pump casings, impellers, tanks, vessels, pipelines, and slurry or bulk-material systems. Its wear-resistant material is suited to surfaces exposed to abrasive service.
Selection for Broad Exposure Areas
Consider ZDS-CA1826 when the coating area is accessible and the equipment faces both wear and fluid exposure. Its corrosion resistance and thixotropic consistency make those conditions important factors when planning the coating task.
Prepare the work surface
Prepare the coating area using the product-specific preparation instructions.
- Inspect the coating area for loose material, contamination and the condition of any existing surface layer.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the coating area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the coating or lining according to the product instructions and the recommended thickness where given.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60°C to +160°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.5-1.0 mm / coat. Use the stated thickness type and range when planning the work.
Where is this product used?
ZDS-CA1826 is intended for protective coating, repair and rebuilding. Application settings include Pumps and pump casings, tanks and vessels, impellers, slurry and bulk-material systems, powder and ash handling systems, industrial pipelines.