ZDS-CW5014
ZDS-CW5014 ProWrap Pipe Re-Inforcement Resin
ZDS-CW5014 supports composite reinforcement and repair of industrial pipelines and metal components. Its low viscosity helps wet reinforcement fibres efficiently.
Product overview
Composite reinforcement resin for pipe repair
ZDS-CW5014 is a low-viscosity resin for reinforcing and rebuilding damaged industrial pipelines and metal components with a composite system. It supports fibre wet-out as part of a planned repair.
The resin’s wet-out behavior helps reinforcement fibres become coated during application. Its glass transition temperature, or Tg, is relevant when assessing the resin within the intended service conditions and complete reinforcement design.
Key material properties
- Fibre wet-out: Low viscosity helps the resin wet the reinforcement fibres.
- Composite reinforcement: Resin wet-out is part of preparing the reinforcement system.
- Structural applications: Consider the material as part of the complete reinforcement design.
Evaluate the material
ZDS-CW5014 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-CW5014 |
| Product series | ZDS-CompositeWrap |
| Product family | Pipe reinforcement & FRP repair |
| Substrates and equipment | Industrial pipelines, metal components |
| Form and color | Resin; Typical: Amber to translucent |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 12-24 h |
| Full cure / cure conditions | 24 h / 7 days: full properties |
| Service temperature | continuous 130°C |
| Flexural strength | >100 MPa |
| Glass transition (Tg) | 126°C |
| Mixed viscosity | ≈20 mPa·s |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Application guidance | Recommended: Per reinforcement design |
Questions about your operating conditions?
Industrial pipe reinforcement and repair
Reinforcing industrial pipelines
ZDS-CW5014 is a resin for composite reinforcement on industrial pipelines and metal components. Its low viscosity helps wet reinforcement fibres so the resin can form part of the planned reinforcement system.
Choosing a resin for repair planning
Fit depends on the component condition, the damaged area and the proposed reinforcement design. Consider access to the full area and how well the resin can wet the selected reinforcement before work begins.
Prepare the work surface
Prepare the reinforcement area using the product-specific preparation instructions.
- Inspect the reinforcement area for damage, loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the reinforcement area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Follow the product instructions and the applicable reinforcement design for material placement.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h / 7 days: full properties. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: continuous 130°C. Application and service temperatures describe different conditions.