ZDS-MR1348
ZDS-MR1348 Conductive Electrophoretic Adhesive
ZDS-MR1348 repairs and rebuilds industrial metal components at prepared bonding areas. Its electrical conductivity supports static-discharge control designs.
Product overview
Conductive metal repair adhesive
ZDS-MR1348 is a conductive adhesive for repairing and rebuilding industrial metal components at prepared bonding areas. It is intended for planned field-applied repairs.
Its electrical conductivity supports repair designs that include static-discharge control, while adhesion to prepared surfaces helps the material stay engaged with the contact area. Surface condition, access, and bond-area fit are important selection factors.
Key material properties
- Electrical conductivity: A conductive material for repair designs that include static-discharge control.
- Adhesion to prepared surfaces: Surface condition and preparation are important to the bond.
- Field application: Suitable for consideration in a planned on-site repair.
Evaluate the material
ZDS-MR1348 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-MR1348 |
| Product series | ZDS-MetalRebuild |
| Product family | Metal rebuilding & cold repair |
| Substrates and equipment | Industrial metal components |
| Form and color | Adhesive; Typical: Black to dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 300°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended bond-line thickness | Recommended: 0.2-1.0 mm bond line |
Questions about your operating conditions?
Industrial repair applications
Repair and rebuild industrial metal components
ZDS-MR1348 is used for field-applied repair and rebuilding of industrial metal components. Its adhesion to prepared surfaces supports a planned repair at an existing bonding area.
Choose for conductive repair designs
Use ZDS-MR1348 when electrical conductivity or static-discharge control is part of the repair design. Confirm that the contact area is accessible and large enough for the planned application.
Prepare the work surface
Prepare the bonding area using the product-specific preparation instructions.
- Identify the contact surfaces and inspect for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the bonding area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the adhesive to the prepared contact area according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 300°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.2-1.0 mm bond line. Use the stated thickness type and range when planning the work.