ZDS-MR1006
ZDS-MR1006 Pipe Leak Repair Adhesive
ZDS-MR1006 repairs and rebuilds PVC/PPR pipe areas. It provides high adhesion to prepared industrial substrates for planned field repairs.
Product overview
PVC/PPR Pipe Repair Adhesive
ZDS-MR1006 is a field-applied adhesive for repair and rebuilding work on PVC/PPR pipes. PVC means polyvinyl chloride, while PPR means polypropylene random copolymer.
Its high adhesion to prepared industrial substrates makes surface condition a key part of the repair plan. The product suits jobs where the contact area can be reached and prepared before adhesive application.
Key material properties
- Adhesion to prepared surfaces: Surface condition and preparation are important to the bond.
- Field application: Suitable for consideration in a planned on-site repair.
Evaluate the material
ZDS-MR1006 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-MR1006 |
| Product series | ZDS-MetalRebuild |
| Product family | Metal rebuilding & cold repair |
| Substrates and equipment | PVC/PPR pipes |
| Form and color | Adhesive; Typical: Grey |
| Working time at 25°C | Typical: 5-15 min |
| Full cure / cure conditions | 24 h at 25°C |
| Service temperature | Typical: -40°C to +120°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended bond-line thickness | Recommended: 0.2-1.0 mm bond line |
Questions about your operating conditions?
Pipe Repair Applications
Repair and rebuilding of PVC/PPR pipes
ZDS-MR1006 is an adhesive for repairing and rebuilding PVC and PPR pipe areas. Its high adhesion to prepared industrial substrates supports a planned field-applied repair where the bonding surfaces can be properly prepared.
Fit for accessible repair areas
Review the contact area, available access and the planned bond line before selecting this material. The product is a practical fit when the repair area can be reached, inspected and prepared for adhesive placement.
Prepare the work surface
Prepare the bonding area using the product-specific preparation instructions.
- Identify the contact surfaces and inspect for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the bonding area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Apply the adhesive to the prepared contact area according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 5-15 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h at 25°C. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: Typical: -40°C to +120°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 0.2-1.0 mm bond line. Use the stated thickness type and range when planning the work.