ZDS-MR1347
ZDS-MR1347 Conductive Electrophoretic Repair Compound
ZDS-MR1347 repairs and rebuilds prepared pipe fittings and metal components. Its conductivity supports static-discharge control in suitable repair designs.
Product overview
Conductive metal repair compound
ZDS-MR1347 is a paste for repairing and rebuilding pipe fittings and metal components. It is intended for planned field-applied structural repair on prepared industrial surfaces.
Its electrical conductivity supports repair designs that include static-discharge control, meaning management of static electricity buildup and release. High adhesion to prepared surfaces also makes surface condition an important part of product fit.
Key material properties
- Electrical conductivity: A conductive material for repair designs that include static-discharge control.
- Adhesion to prepared surfaces: Surface condition and preparation are important to the bond.
- Field application: Suitable for consideration in a planned on-site repair.
Evaluate the material
ZDS-MR1347 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-MR1347 |
| Product series | ZDS-MetalRebuild |
| Product family | Metal rebuilding & cold repair |
| Substrates and equipment | Pipe fittings, metal components |
| Form and color | Paste; Typical: Black to dark grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 300°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 1-5 mm |
Questions about your operating conditions?
Repair and selection fit
Repair pipe fittings and metal components
ZDS-MR1347 is a paste for rebuilding repair areas on pipe fittings and metal components. Its adhesion to prepared industrial surfaces supports a planned field-applied structural repair when the existing component needs material restored.
Match access and electrical needs
Choose this compound when the repair area can be reached, shaped and sized for the planned work. Electrical conductivity matters when the repair design includes static-discharge control, which helps manage the buildup and release of static electricity.
Prepare the work surface
Prepare the repair area using the product-specific preparation instructions.
- Inspect the damaged area and the surrounding component for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the repair area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Place and shape the repair material according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 300°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 1-5 mm. Use the stated thickness type and range when planning the work.