ZDS-MR5007
ZDS-MR5007 Machinable Aluminum Repair Compound
ZDS-MR5007 repairs and rebuilds damaged pipe fittings and metal components. Its cured surface can be machined for a defined finished shape.
Product overview
Machinable metal repair compound
ZDS-MR5007 is a paste for repairing and rebuilding pipe fittings and metal components. It is intended for field-applied structural repair on prepared industrial surfaces.
After curing, the rebuilt area can be machined when the repair requires a specific finished shape. High adhesion to prepared surfaces makes surface condition and access important parts of product selection.
Key material properties
- Machinable after cure: Relevant when the rebuilt area needs machining after curing.
- Adhesion to prepared surfaces: Surface condition and preparation are important to the bond.
- Field application: Suitable for consideration in a planned on-site repair.
Evaluate the material
ZDS-MR5007 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-MR5007 |
| Product series | ZDS-MetalRebuild |
| Product family | Metal rebuilding & cold repair |
| Substrates and equipment | Pipe fittings, metal components |
| Form and color | Paste; Typical: Metallic grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 180°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 1-5 mm |
Questions about your operating conditions?
Repair and rebuilding applications
Pipe fitting and metal component repair
ZDS-MR5007 rebuilds damaged areas on pipe fittings and metal components. Its adhesion to prepared industrial surfaces supports a planned repair where the surrounding metal can be properly prepared.
Fit for the repair area
The repair dimensions and access around the component help determine whether this paste is a practical fit. Its machinable cured surface suits repairs that need a defined finished shape after curing.
Prepare the work surface
Prepare the repair area using the product-specific preparation instructions.
- Inspect the damaged area and the surrounding component for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the repair area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Place and shape the repair material according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 180°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 1-5 mm. Use the stated thickness type and range when planning the work.