ZDS-MR5005
ZDS-MR5005 Stainless Steel Repair Compound
ZDS-MR5005 repairs and rebuilds damaged metal areas on industrial equipment. The cured material can be machined and resists corrosion.
Product overview
Stainless Steel Repair Compound
ZDS-MR5005 is a paste for repairing and rebuilding damaged metal components and industrial equipment. It is suited to repair areas on pumps, valves, flanges, tanks, vessels and pipelines.
Its corrosion resistance supports selection for equipment exposed to corrosive conditions. Adhesion depends on a properly prepared surface, while machinability after cure matters when the rebuilt area needs to be shaped to the surrounding component.
Key material properties
- Machinable after cure: Relevant when the rebuilt area needs machining after curing.
- Corrosion resistance: A selection factor for equipment exposed to corrosive conditions.
- Adhesion to prepared surfaces: Surface condition and preparation are important to the bond.
Evaluate the material
ZDS-MR5005 technical specifications
| Property | Value / conditions |
|---|---|
| Product model | ZDS-MR5005 |
| Product series | ZDS-MetalRebuild |
| Product family | Metal rebuilding & cold repair |
| Substrates and equipment | Pumps and pump casings, valves, flanges, tanks and vessels, industrial pipelines, metal components |
| Form and color | Paste; Typical: Metallic grey |
| Working time at 25°C | Typical: 30-45 min |
| Initial cure at 25°C | Typical: 4-6 h |
| Full cure / cure conditions | 24 h |
| Service temperature | -60 to 180°C |
| Recommended application temperature | Recommended: 10°C to 35°C |
| Recommended application thickness | Recommended: 1-5 mm |
Questions about your operating conditions?
Repair and Rebuilding Uses
Rebuilding damaged metal equipment
ZDS-MR5005 is used to repair and rebuild metal areas on pumps, pump casings, valves, flanges, tanks, vessels and industrial pipelines. Its adhesion to prepared industrial substrates helps the compound stay in contact with the repair surface.
Fitting repairs to the finished component
Choose this compound when the rebuilt area must match the surrounding equipment shape. It can be machined after cure, which helps when the repair dimensions and access require a finished surface that fits the component.
Prepare the work surface
Prepare the repair area using the product-specific preparation instructions.
- Inspect the damaged area and the surrounding component for loose material and contamination.
- Arrange access to the full work area and the tools needed for the next step.
- Address contamination using the preparation method specified for this product and the actual surface.
Plan the work
Application and cure planning
- Prepare the repair area and arrange access and tools before starting.
- Mix the components according to the product instructions after surface preparation and setup are complete.
- Place and shape the repair material according to the product instructions.
- Use the technical table to plan the cure stages. Follow the applicable repair or application procedure for handling, loading and return to service.
Product selection questions
How much working time is available?
The typical working time at 25°C is 30-45 min. Complete surface preparation and setup before mixing.
What is the full-cure schedule?
Full cure: 24 h. Follow the product instructions for the applicable cure conditions.
What temperatures apply?
Recommended application temperature: 10°C to 35°C. Service temperature: -60 to 180°C. Application and service temperatures describe different conditions.
What thickness is recommended?
Recommended: 1-5 mm. Use the stated thickness type and range when planning the work.